-
The above Banner is a Sponsored Banner. Upgrade to Premium Membership to remove this Banner & All Google Ads. For full list of Premium Member benefits Click HERE.
MCG0803
Content Type
Forums
Premium Membership
Dealer Directory
Wiki
Videos
Prize Draws
Posts posted by MCG0803
-
-
Anyone run a 2021 Krugerrand .999 1oz through their PMV (Standard Sigma). My PMV set to 99.9 plot within the brackets to the right but def further out than I'm used to. On 99.99 they fall just outside wheras my 2020 Krugs fall just inside. Also getting ranges of 1.60-1.72 in measurement mode whereas my 2020 Krugs are usually around 1.65-1.68. Just wondering if the alloys for the 2021 are a bit different (more copper).
Anyone got some numbers that I can compare with?
-
Thanks silenceissilver,
I've run the SG tests and have the micro engraved marks. All other checks are good so I'm not too concerned. I ran them through the Sigma and they seem pretty spot on. Just the thickness thing which was odd because the Perth Mint state 3.1mm
-
Thanks all very much for the comments
-
$50 Digital calipers. They seem accurate enough for other coins
-
Hi,
Can anyone tell me how thick their silver 1oz Kangaroos are (say 2020)? Lots of conflicting info on the web. Perth Mint says 3.1mm but all the ones I've seen are all around 2.85mm
2021 Krugerrand .999 1oz - PMV results
in Silver
Posted
Thanks for the comments Liam. These Krugs test up similar Silver Eagles on the PMV so just wondering if anyone had the same experience, or had any info they could pass on. I'm not too concerned as they pass all my other checks (SG/Magnet/Ping/Dimensions/Visual) and I also bought them from one of the best dealers here in NZ.